Depuis plusieurs dizaines d’années, Pietro Carnaghi produit des fraiseuses verticales à portique mobile type Gantry, dénommées modèles UNIMILL. Caractérisées par des solutions techniques extrêmement innovantes et dotées de caractéristiques techniques et d’automatisation de haute qualité, les modèles Unimill sont entièrement réalisés avec des structures massives, dans lesquelles le portique mobile et le mouvement de l’axe Y sont guidés hydrostatiquement. L’écart entre les montants peut atteindre 10000 mm et la largeur de la table d’usinage 9000 mm. La longueur de la table d’usinage est modulaire et varie en fonction de la demande du client. Le modèle UNIMILL peut être équipé de plateau de tournage de façon à constituer une solution complète pour tous les usinages possibles nécessaires.
Les modèles Unimill permettent l’usinage en pendulaire, en aménageant deux zones séparées sur la table : une zone d’usinage, avec les protections et carters mobiles (options) et une zone de préparation pièce, accessible au moyen de passerelles à hauteur de la table.
La conception a fait l’objet d’un soin particulier afin de favoriser la flexibilité de ces modèles et garantir la plus haute productivité.
Le changement des accessoires et des outils s’effectue automatiquement, avec des systèmes de chaînes porte-outils, disques magasin ou pick-up mobiles pour les accessoires les plus lourds.
Pour compléter l’universalité des opérations qu’il est possible d’effectuer, une vaste gamme d’accessoires têtes de fraisage est disponible.
Caractéristiques techniques:
UniMil 40 |
UniMill 50 |
UniMill 60 |
UniMill 70 |
UniMill 80 |
UniMill 90 |
UniMill 100 |
UniMill 110 |
UniMill 120 |
UniMill 130 |
UniMill 140 |
||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance between the columns | mm | 4000 | 5000 | 6000 | 7000 | 8000 | 9000 | 10000 | 11000 | 12000 | 13000 | 14000 |
Table width | mm | 3000 | 4000 | 5000 | 6000 | 7000 | 8000 | 9000 | 10000 | 11000 | 12000 | |
Milling height with vertical head: fixed crossrail | mm | 1500 - 2000 - 2500 | ||||||||||
Milling height with vertical head: movable crossrail | mm | 3000 - 3500 - 4000 | 3000 - 4000 - 5000 - 6000 | 4000 - 5000 - 6000 - 7000 | 4000 - 5000 - 6000 - 7000 - 8000 | |||||||
Ram stroke Z axis | mm | 1500 | 2000 - 2500 - 3000 - 3500 - 4000 | |||||||||
Ram section | mm | 480 x 480 | 500 x 500 / 600 x 600 | |||||||||
Milling power | kW | 37 / 50 | 60 / 75 / 113 | |||||||||
Milling torque | Nm | 1900 / 2600 | 6122 / 6250 / 10100 | |||||||||
Max. RPM | rpm | 4000 | 4000 / 2500 | |||||||||
Tool taper | ISO 50 - HSK 100 | ISO 50 or HSK 100 / ISO 60 or HSK 160 | ||||||||||
Rapid feed X, Y and Z | mm/min |
20000 | 15000 | 10000 | ||||||||
Turning table diameter | mm |
3000 | 4000 | 5000 | 6000 | 8000 | 10000 |
PIETRO CARNAGHI WEBSITE DISCLAIMER
COPYRIGHT
PIETRO CARNAGHI (PC) PROPRIETARY INFORMATION
The information contained In this website and in related documents (texts, images, tables etc.) may contain information owned by PC.
This information may not be used, passed on to others or reproduced without the written consent of PC. Unauthorised use is prohibited.
PRIVACY POLICY
Information pursuant to Art. 13 Leg. Dec. no. 196 of 30 June 2003 (Personal data protection law), and Art. 14 of Regulation no. 679/2016 GDPR.
The personal data provided by the User shall be placed in a special computerised database so that it can be used to access the requested services. The data controller is Pietro Carnaghi S.p.A., with registered office in Villa Cortese (MI), Via S. D'Acquisto 7.
Pietro Carnaghi S.p.A., as data controller, informs you that the email address requested at the time of registration and the other personal data provided, will be processed with the consent of the person concerned, in order to provide the information requested by the User.
Pursuant to Art. 7 of Leg. Dec. no. 196 of 30 June 2003, (Personal data protection law) and Art. 17 of Regulation no. 679/2016 GDPR, the User has the right to obtain confirmation of the existence or otherwise of personal data concerning him/her, even if not yet recorded, and the communication of such information in an intelligible form.
Furthermore, the User has the right to obtain information on the following:
• source of personal data;
• purposes and method of processing;
• logic applied in the event of processing carried out with the aid of electronic means;
• identification details of the Data Controller, data supervisors and the representative designated pursuant to Art. 5, paragraph 2 of Leg. Dec. no. 196 of 30/06/2003;
• parties or categories of parties to whom personal data may be communicated or who may have access to such personal data in their capacity as designated representative in the Country’s territory, or as managers or persons in charge.
Furthermore, the User has the right to obtain:
• the updating, correction or, if of interest, additions to personal data;
• the cancellation, transformation into anonymous form, or blocking of data processed in violation of law, including those which need not be retained for the purposes for which the data were collected or subsequently processed.
• certification that the parties to whom the data have been transferred or disseminated have been made aware of the operations specified in the above points, also as regards their content, except for the case where notification proves impossible or requires the use of means clearly disproportionate to the right being protected. Finally, the User has the right to object, in whole or in part:
• on legitimate grounds, to the processing of personal data concerning him/her, even if relevant to the purpose of the collection;
CV MANAGEMENT LINK DISCLAIMER
We inform you that the information collected about the interested party shall be managed and stored in compliance with EU Regulation no. 679/2016 GDPR and the Privacy Leg. Dec. 196/03 and subsequent amendments. The data controller is Piero Carnaghi S.p.A with registered office in Villa Cortese (MI), Via S. D'Acquisto 7 and the person in charge of data processing is the Head of the Human Resources Office. Finally, it should be noted that the person concerned in regards to his/her personal data also has, where applicable, the rights referred to in Articles 15-21 GDPR (Right of access, Right of rectification, right to be forgotten, right to restriction of processing, right to data portability, right of objection), by sending an email to [email protected] as well as the right to submit claims to the Guarantor Authority.